|
12/02/2016, 01:26 PM | #1 |
Registered Member
Join Date: Feb 2016
Location: Aurora, IL
Posts: 95
|
Profilux 4 360WE connection
I'm looking to get the new Profilux 4 and am seeing some conflicting info online on whether or how the Kessil 360WE can be connected to the controller for both color and intensity.
Could you please provide me info on how this can be done and what additional adapters I would need. Some info indicates cutting the power supply. Would like to avoid this if possible. Thanks |
12/02/2016, 02:15 PM | #2 |
Registered Member
Join Date: Jul 2015
Posts: 236
|
Hi,
In order to connect this light to the ProfiLux, you will need an LBF-AP box. Each box supports 2 LED channels. Use the Kessil control cable and cut the RJ-45 end of the cable and connect those wires to the LBF-AP box. |
12/02/2016, 07:54 PM | #3 |
Registered Member
Join Date: Feb 2016
Location: Aurora, IL
Posts: 95
|
|
12/09/2016, 12:35 PM | #4 |
Registered Member
Join Date: Jul 2016
Location: Fort Myers, FL USA
Posts: 107
|
As Vinny outlined, very simple.
Inside the LBF-AP box you'll find 4 screw terminals, L1/3 and L2/4 both have a pos/neg terminal. the LBF-AP box will connect to your L ports, either L1/3 or L2/4 or others.
__________________
Marco GHL USA - Fort Myers, FL Operations For All GHL questions please refer to our Sponsor forum: http://reefcentral.com/forums/forumdisplay.php?f=527 |
02/18/2017, 10:51 AM | #5 |
Registered Member
Join Date: Feb 2016
Location: Aurora, IL
Posts: 95
|
Can someone please confirm on whether I've correctly connected this?
|
02/18/2017, 07:12 PM | #6 |
Registered Member
Join Date: Feb 2016
Location: Aurora, IL
Posts: 95
|
|
02/19/2017, 11:05 AM | #7 | |
RC Sponsor
Join Date: Sep 2009
Posts: 14,173
|
Quote:
From this image Left to right. PIN 1 White + PIN 2 Black - PIN 3 not used PIN 4 not use PIN 5 RED + PIN 6 Green - PIN 7 not used PIN 8 not used If you don't have the end you cut off, use an ohm meter and check the continuity. This is the 3.5mm side.
__________________
Director Customer Support Royal Exclusiv USA For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745 Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476 Last edited by slief; 02/19/2017 at 11:11 AM. |
|
02/19/2017, 01:27 PM | #8 | |
Registered Member
Join Date: Feb 2016
Location: Aurora, IL
Posts: 95
|
Quote:
|
|
11/23/2017, 06:14 PM | #9 |
Registered Member
Join Date: Jan 2011
Location: Sydney Australia
Posts: 92
|
Just wanted to check if I connect the wires to the above Ethernet style plug do I need the LBF-AP box?
Or will this plug just go straight into the L port and work? Also would anybody have a sample of there schedule in the Profilux to see the minimum % of the lights I have also seen I need to set the voltage to 1.3V for the port is this correct ? Is this a similar thing t9 setting the voltage of the port for Tunze pumps ? |
|
|