|
![]() |
|
|
#1 |
|
Premium Member
![]() Join Date: Aug 2004
Location: wesley chapel, florida
Posts: 4,106
|
setting on 7095...when 2 6100s on same side
Because of cosmetic reasons, i have both 6100s on the same side of the tank, I have on b/o a nano 6055 for the other side. Anyhow, til the nano arrives, what setting is recommended for 2 on the same side? The book shows sequential, but at the same time show 4 pumps hooked up. Any suggestions when only using 2? I need to maximize flow so the SPS on the far side get adequate flow.
thanks Ben
__________________
Ben Current Tank Info: None :( |
|
|
|
|
|
#2 |
|
Premium Member
![]() Join Date: Aug 2004
Location: wesley chapel, florida
Posts: 4,106
|
After posting, i decided to experiment...it is set to Pulse, settings are 30-100% with a 3sec interval.....any thoughts
__________________
Ben Current Tank Info: None :( |
|
|
|
|
|
#3 |
|
RC Sponsor
![]() Join Date: Apr 2000
Location: Austin Texas USA
Posts: 30,884
|
I would use pulse or Interval 2, if you use pulse it would be interesting to invert the pulses so one pump is doing 100-30 and the other 30-100.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|
|
|
|
#4 |
|
Premium Member
![]() Join Date: Aug 2004
Location: wesley chapel, florida
Posts: 4,106
|
Thanks roger...will give it a try...didnt realise i could do that!
__________________
Ben Current Tank Info: None :( |
|
|
|
![]() |
| Thread Tools | |
|
|