2 Sumps for sale

Stirfry001 · 02/08/2008, 12:32 AM

I have a 20H Oceanic Sump that I picked up awhile ago that I have never used. It also has a skimmer with it. Not sure what kind of skimmer but the pump on it says ViaAqua VA-2300. The skimmer looks like it just needs a gasket on the cup. The sump also has a glass cover on one side with a 1" bulkhead. I bought it for $100 so I will let it go for the same. 24x12x17 L/W/H

Stirfry001 · 02/08/2008, 12:38 AM

Acrylic Sump made by ?. Has pretty much the same Dim. as a 20H. It is 24x12x18. The front tapers down to 24x12x13 at the end. Acrylic is 1/4" thick. Not sure what size the actual holes are but the gray bulkhead is 3/4" on the inside. The right side bulkhead has been plugged and would probably just be easier to replace. As you can see in the pictures it has a lower egg crate tray and then an upper acrylic tray with holes drilled in it. Both are removable. In the bottom pic, that is silicon not a crack. $75

Orangetruck94 · 02/08/2008, 12:47 AM

Are they both 12" wide?
I am looking for 1 that is 11" wide.

Thanks!

Stirfry001 · 02/08/2008, 01:16 AM

yeah, both are 12"

mrapisura · 02/08/2008, 07:45 PM

How big is the skimmer section on the Oceanic sump. I am wondering if my skimmer will fit inside it.

Stirfry001 · 02/08/2008, 07:51 PM

15Lx12W

EvilE · 02/09/2008, 12:35 AM

are you going sumpless Corey?

Stirfry001 · 02/09/2008, 09:44 AM

Ya, I have never had one on my tank. I am gonna wait till I get a bigger tank to do my sump. Most of the problem is my stand. It sucks and I will prob. be moving in a couple months.

EvilE · 02/09/2008, 10:44 AM

Quote:

Originally posted by Stirfry001
Ya, I have never had one on my tank. I am gonna wait till I get a bigger tank to do my sump. Most of the problem is my stand. It sucks and I will prob. be moving in a couple months.

Same with me (sump-wise). Hey, you better move around here! It's nice having you so close by!!

mwcahill · 02/10/2008, 02:49 PM

Any idea how hard it would be to make this work with a 29 BioCube im running a hang on skimmer but I started trying to figure out today how to build a fuge and this would be a hell of alot easier.

Stirfry001 · 02/10/2008, 05:49 PM

I've never plumed a sump so I have no idea how hard it would be. I know there are a lot of knowledgeable people on here that are willing to help a fellow reefer (usually for a few beers).

Kentanner11 · 02/10/2008, 06:18 PM

Its not that hard to plumb a sump. You have to get water to the sump (overflow, drilled or hang on) and get water back to the tank (right size pump)

Stirfry001 · 02/22/2008, 09:29 AM

Bump. $50 bucks each. Need to get them out of the house.

random_ryan · 02/22/2008, 01:09 PM

pm sent

Stirfry001 · 02/22/2008, 11:10 PM

Oceanic sold, Acrylic still available.

02/08/2008, 12:32 AM	#1
Stirfry001 Premium Member Join Date: Jul 2006 Location: Gilbert, AZ (Greenfield/Baseline) Posts: 770	2 Sumps for sale I have a 20H Oceanic Sump that I picked up awhile ago that I have never used. It also has a skimmer with it. Not sure what kind of skimmer but the pump on it says ViaAqua VA-2300. The skimmer looks like it just needs a gasket on the cup. The sump also has a glass cover on one side with a 1" bulkhead. I bought it for $100 so I will let it go for the same. 24x12x17 L/W/H

02/08/2008, 07:45 PM	#5
mrapisura Registered Member Join Date: Mar 2006 Location: San Tan Valley (QC), AZ Posts: 574	How big is the skimmer section on the Oceanic sump. I am wondering if my skimmer will fit inside it. __________________ -Mike Current Tank Info: 58g mixed reef, 20H DYI sump/refugium, octopus150 skimmer, 250 HQI Pendant, Korallin 1502 Ca Reactor, and 12 Gal Aquapod

02/09/2008, 12:35 AM	#7
EvilE Registered Member Join Date: Mar 2007 Location: Mesa, AZ Posts: 2,945	are you going sumpless Corey? __________________ Targzissians Are Obviously Reptilian Current Tank Info: 55 gallon african cichlid FW, 55 Gallon mixed reef SW

02/10/2008, 02:49 PM	#10
mwcahill Registered Member Join Date: Mar 2007 Location: Portland OR Posts: 672	Any idea how hard it would be to make this work with a 29 BioCube im running a hang on skimmer but I started trying to figure out today how to build a fuge and this would be a hell of alot easier. __________________ Marty Cahill Current Tank Info: 3.5 Gallon PICO glass tank

02/10/2008, 06:18 PM	#12
Kentanner11 Registered Member Join Date: Apr 2007 Location: Central. Tucson Posts: 1,972	Its not that hard to plumb a sump. You have to get water to the sump (overflow, drilled or hang on) and get water back to the tank (right size pump) __________________ - Tanner Current Tank Info: 29g Nano (being set up), 5gal FW, 20gL planted Fw,

02/08/2008, 12:38 AM	#2
Stirfry001 Premium Member Join Date: Jul 2006 Location: Gilbert, AZ (Greenfield/Baseline) Posts: 770	Acrylic Sump made by ?. Has pretty much the same Dim. as a 20H. It is 24x12x18. The front tapers down to 24x12x13 at the end. Acrylic is 1/4" thick. Not sure what size the actual holes are but the gray bulkhead is 3/4" on the inside. The right side bulkhead has been plugged and would probably just be easier to replace. As you can see in the pictures it has a lower egg crate tray and then an upper acrylic tray with holes drilled in it. Both are removable. In the bottom pic, that is silicon not a crack. $75

02/08/2008, 12:47 AM	#3
Orangetruck94 Registered Member Join Date: Dec 2007 Location: Phoenix, AZ Posts: 322	Are they both 12" wide? I am looking for 1 that is 11" wide. Thanks!

02/08/2008, 01:16 AM	#4
Stirfry001 Premium Member Join Date: Jul 2006 Location: Gilbert, AZ (Greenfield/Baseline) Posts: 770	yeah, both are 12"

02/08/2008, 07:51 PM	#6
Stirfry001 Premium Member Join Date: Jul 2006 Location: Gilbert, AZ (Greenfield/Baseline) Posts: 770	15Lx12W

02/09/2008, 09:44 AM	#8
Stirfry001 Premium Member Join Date: Jul 2006 Location: Gilbert, AZ (Greenfield/Baseline) Posts: 770	Ya, I have never had one on my tank. I am gonna wait till I get a bigger tank to do my sump. Most of the problem is my stand. It sucks and I will prob. be moving in a couple months.

02/10/2008, 05:49 PM	#11
Stirfry001 Premium Member Join Date: Jul 2006 Location: Gilbert, AZ (Greenfield/Baseline) Posts: 770	I've never plumed a sump so I have no idea how hard it would be. I know there are a lot of knowledgeable people on here that are willing to help a fellow reefer (usually for a few beers).

02/22/2008, 09:29 AM	#13
Stirfry001 Premium Member Join Date: Jul 2006 Location: Gilbert, AZ (Greenfield/Baseline) Posts: 770	Bump. $50 bucks each. Need to get them out of the house.

02/22/2008, 01:09 PM	#14
random_ryan Registered Member Join Date: Feb 2006 Location: West Mesa "still a west sider" Posts: 4,427	pm sent __________________ Has no one to play with, all of my imaginary friends are in timeout or grounded! Current Tank Info: NO TANKS. :o( .... Taking A Break.

02/22/2008, 11:10 PM	#15
Stirfry001 Premium Member Join Date: Jul 2006 Location: Gilbert, AZ (Greenfield/Baseline) Posts: 770	Oceanic sold, Acrylic still available.