|
|
|
09/08/2008, 10:39 PM
|
#1 |
|
Registered Member
Join Date: Dec 2003
Location: Lake St Louis
Posts: 250
|
Outer Orbit Lights and AC3
I have an Outer Orbit lighting system 1079 model with 12 moon lights. I have the AC3 programmed with a DC8 with both the blue and white LED power ruuning intot he DC8. The AC3 is programmed like so for this endevor....
If Sun 000/000 Then VHO ON If Sun 015/-015 Then MHL ON If Sun 030/-030 Then MHC ON If Sun 045/-045 Then MHR ON If Moon 000/000 Then MN1 ON If Moon 015/-015 Then MN2 ON If Temp < RT+-0.4 Then HET ON If Temp < RT+-1.0 Then ALM ON If Temp > RT+1.0 Then HET OFF Two questions will the intensity of the LED lighting with the programmed moon cycle vary based on moon cycle or is this just an on our off situation? Has anyone used a flash stick with an AC3?
__________________
Drunes Current Tank Info: 180 Reef Tank in progress, 200 Gallon Sump, AquaC Skimmer, Balling Method, Orbit lighting |
|
|
|
09/10/2008, 11:19 AM
|
#2 |
|
RC Sponsor
 Join Date: Aug 2001
Location: San Jose, CA
Posts: 4,311
|
The 3rd party moon lights will just turn on/off - there will be no dimming. I don't have any experience with the flash stick.
Curt |
|
|
|
 |
|
|
