Vertex Skimmer club - Page 31

GixxerSWFW · 10/31/2009, 08:16 PM

Just bought the gen 2 in280 for my 120G cant wait gna start finally building the stand next weekend and then begin the dry set up and rough plumbing then we can see this bad boy in action HAHA Say goodbye to nasty nitrates and hello clean water lol

rkb · 10/31/2009, 08:25 PM

Congrats and welcome to the club!!!! Post a pick or two of it when it arrives.

GixxerSWFW · 10/31/2009, 08:35 PM

Will do thanks for everyones help

luis99 · 10/31/2009, 09:42 PM

I'm a proud new owner of a 2nd gen 100 (I got lucky with the last one in stock from premiumaquatics

). I got it in this friday (great shipping) and put it in some live rock im curring. in minutes it pulled out some nice gunky stuff in its first cup. Sunday I will put it to good use in my 50g with 15g refug., replacing my small but loyal CPR backpack.

My question is, what is the best way to empty the cup?
right now I'm turning off the skimmer, empty cup, then power up.
I was thinking of also trying, lowering the foam level, empty cup, then readjust the foam level again.

SUGGESTIONS??????

II vertex 100.jpg

Nerdy Nudi · 10/31/2009, 10:34 PM

Ive always emptied my skimmers while I fed. the feeding collapses the foam tower so you dont need to worry abot adjusting or turning anything on or off.

Charlie Davidson · 11/01/2009, 12:06 AM

There really is no wrong way, But it has been suggested and I believe it to be a good Idea-- That you should turn off your skimmer every time. This will allow water into the air line/ventri. Salt deposits often build -up there and this helps wash them away

(ro/di water run into your airline 2-3 x weekly helps alot also)

If you just want to turn down the level, while cleaning cup, use a marker pin on wedgepipe, so you know exactly were that sweet spot was!

Jared J · 11/01/2009, 07:17 AM

Quote:

Originally Posted by luis99

I'm a proud new owner of a 2nd gen 100 (I got lucky with the last one in stock from premiumaquatics

). Attachment 88572

Ahh...so you're the one :P

putz28 · 11/01/2009, 04:03 PM

Sadly, 2 weeks into a great experience with my new Vertex IN-250 the resun pump has died.

I'll see what I can do about a replacement in the morning.

I noticed it was making a bit of a vibration yesterday, by today it what really making noise and not pumping enough to make the skimmer function...

And I just sold my old skimmer today

Jared J · 11/01/2009, 05:02 PM

Well, from what I've read they are very good about replacing pumps as some of the Resun pumps have been found to be defective.

EvMiBo · 11/01/2009, 05:34 PM

putz if you ordered it from premiumaquatics or marinedepot it shouldn't be a problem getting it replaced. i haven't heard too many stories of pump failures on the 250, sorry it had to be you

putz28 · 11/02/2009, 11:49 AM

The pump just needing a little cleaning, is working fine.

Cheers.

reefguard · 11/02/2009, 07:33 PM

I am about to pick up a used in-280 tomorrow for $250. I have yet to see the skimmer and the guy says he only used it in 2 mos. Who has got one and what are your thoughts about the skimmer. It is going to 180 gallon mix reef. total water of 200 gallons.
Thanks
Noel

reefguard · 11/03/2009, 08:27 PM

Well, since I didn't get any inputs I pulled the trigger anyways. This thing is BIG. I've got it set up and will keep you guys posted.

ironwill723 · 11/03/2009, 08:35 PM

I have a 280. Works great. Very pleased.

username in use · 11/04/2009, 12:33 PM

I just bought a used in80 and set it up on my tank. Seems to be pulling air well, but its also kinda loud. I read that these things run almost silent. It was sold to be as a gen2, but when I look online at pictures, gen2 impellers are black. Is my white impeller a gen1 and if so, should I just go ahead and mesh mod it? Will it be quieter or do I need to buy a new impeller as well, because everyone seems to be sold out. Thanks.

Jared J · 11/04/2009, 02:28 PM

You could do the mod and pick up the new impeller when they come in. It seems that the Vertex line is becoming quite a hit as everyone is starting to sell out of skimmers and parts. Hopefully that's a good thing.

username in use · 11/04/2009, 02:42 PM

I just ordered the gen 2 impeller. Took me all afternoon to find someone that had them, and they only had 3 in stock. Everyone else said that they would be 6 to 8 weeks. I think tommorow I will mesh mod this one for the hey of it since I have the new pin coming anyway.

reefguard · 11/04/2009, 03:33 PM

How about ceramic shafts for the pump for the in-280. I juist broke it.

DragonFish · 11/04/2009, 03:39 PM

I just got an IN-80 from premium aquatics and it doesn't look like yours. Mine doesn't have the cap on top of the wedge pipe, and the airline doesn't go into it either. Does that mean that I got a gen 1 or something??

Quote:

Originally Posted by rkb

My IN80 is now starting to break in and become more predictable. This is my first skimmer of this type and I'm getting used to the adjustment and how a very small change can make a very big difference.

frenchie · 11/04/2009, 03:42 PM

i don't think they ever changed insump 80 design only the other models, i still use my gen I 180 and love it, soon as xmas passes i will buy newer model.

NyReefNoob · 11/04/2009, 03:43 PM

ok 2 months into having the in 180 still loving it, but really feel the pump isnt enough for it, having to close pipe 3/4's of the way, tempted to get the next size up skimmers pump and try it out

DragonFish · 11/04/2009, 03:53 PM

So does that mean I'm just missing items? My airline isn't long enough to go all the way up to the cap like the one above, so it just seems fishy.

Charlie Davidson · 11/04/2009, 04:23 PM

Quote:

Originally Posted by NyReefNoob

ok 2 months into having the in 180 still loving it, but really feel the pump isnt enough for it, having to close pipe 3/4's of the way, tempted to get the next size up skimmers pump and try it out

My 180 is set @ the same.. I feel it is underpowered also. I will soon try a sicce pump and a bubbleblaster on it.

You could contact Jeremy at premiumaquatics to see if the 250 pump fits. As others here, I wonder if a different pump would work better..?? I hope the Bubble blaster pump, I ordered to day will fit

reefguard · 11/04/2009, 07:39 PM

Don't you guys think running the airline hooked up to the elbow restricts the air flow? I am running mine not connected right now and hooked up the air meter and getting about 27 lpm. Is that what you I am supposed to get out of this pump?

rkb · 11/04/2009, 08:07 PM

Quote:

Originally Posted by reefguard

Don't you guys think running the airline hooked up to the elbow restricts the air flow? I am running mine not connected right now and hooked up the air meter and getting about 27 lpm. Is that what you I am supposed to get out of this pump?

It is my understanding that the airline hooked up to the elbow serves as a muffler. I would imagine that there would be some restriction in air flow but I doubt that the amount of restriction would be enough to hamper the unit's effectiveness- but that's just my opinion.

10/31/2009, 09:42 PM	#754
luis99 Registered Member Join Date: Oct 2009 Location: california Posts: 8	Emptying the cup I'm a proud new owner of a 2nd gen 100 (I got lucky with the last one in stock from premiumaquatics). I got it in this friday (great shipping) and put it in some live rock im curring. in minutes it pulled out some nice gunky stuff in its first cup. Sunday I will put it to good use in my 50g with 15g refug., replacing my small but loyal CPR backpack. My question is, what is the best way to empty the cup? right now I'm turning off the skimmer, empty cup, then power up. I was thinking of also trying, lowering the foam level, empty cup, then readjust the foam level again. SUGGESTIONS?????? II vertex 100.jpg

11/01/2009, 12:06 AM	#756
Charlie Davidson Registered Member Join Date: Dec 2003 Location: Deltaville , Va Posts: 11,652	There really is no wrong way, But it has been suggested and I believe it to be a good Idea-- That you should turn off your skimmer every time. This will allow water into the air line/ventri. Salt deposits often build -up there and this helps wash them away (ro/di water run into your airline 2-3 x weekly helps alot also) If you just want to turn down the level, while cleaning cup, use a marker pin on wedgepipe, so you know exactly were that sweet spot was! __________________ Richmond Reef Club Current Tank Info: Doing without for a while :)

11/01/2009, 05:34 PM	#760
EvMiBo weird fishes Join Date: Jul 2008 Location: Southwest Florida Posts: 1,228	putz if you ordered it from premiumaquatics or marinedepot it shouldn't be a problem getting it replaced. i haven't heard too many stories of pump failures on the 250, sorry it had to be you __________________ 50g Reef

11/04/2009, 12:33 PM	#765
username in use Azog the Hugger Join Date: Mar 2009 Location: East Hampton, Long Island Posts: 5,458	I just bought a used in80 and set it up on my tank. Seems to be pulling air well, but its also kinda loud. I read that these things run almost silent. It was sold to be as a gen2, but when I look online at pictures, gen2 impellers are black. Is my white impeller a gen1 and if so, should I just go ahead and mesh mod it? Will it be quieter or do I need to buy a new impeller as well, because everyone seems to be sold out. Thanks. __________________ Joshua BrianD - "UIU asked the questions Brian was pondering" Wolverine - "Sorry, Joshua's right" Current Tank Info: 75g in wall in early stages of build

11/04/2009, 02:42 PM	#767
username in use Azog the Hugger Join Date: Mar 2009 Location: East Hampton, Long Island Posts: 5,458	I just ordered the gen 2 impeller. Took me all afternoon to find someone that had them, and they only had 3 in stock. Everyone else said that they would be 6 to 8 weeks. I think tommorow I will mesh mod this one for the hey of it since I have the new pin coming anyway. __________________ Joshua BrianD - "UIU asked the questions Brian was pondering" Wolverine - "Sorry, Joshua's right" Current Tank Info: 75g in wall in early stages of build

10/31/2009, 08:16 PM	#751
GixxerSWFW Registered Member Join Date: Oct 2009 Location: CB Maryland Posts: 64	Just bought the gen 2 in280 for my 120G cant wait gna start finally building the stand next weekend and then begin the dry set up and rough plumbing then we can see this bad boy in action HAHA Say goodbye to nasty nitrates and hello clean water lol

10/31/2009, 08:25 PM	#752
rkb Registered Member Join Date: Jul 2009 Location: Western Hemisphere Posts: 578	Congrats and welcome to the club!!!! Post a pick or two of it when it arrives.

10/31/2009, 08:35 PM	#753
GixxerSWFW Registered Member Join Date: Oct 2009 Location: CB Maryland Posts: 64	Will do thanks for everyones help

10/31/2009, 10:34 PM	#755
Nerdy Nudi Registered Member Join Date: Feb 2009 Posts: 519	Ive always emptied my skimmers while I fed. the feeding collapses the foam tower so you dont need to worry abot adjusting or turning anything on or off.

11/01/2009, 04:03 PM	#758
putz28 Registered Member Join Date: May 2005 Posts: 17	Sadly, 2 weeks into a great experience with my new Vertex IN-250 the resun pump has died. I'll see what I can do about a replacement in the morning. I noticed it was making a bit of a vibration yesterday, by today it what really making noise and not pumping enough to make the skimmer function... And I just sold my old skimmer today

11/01/2009, 05:02 PM	#759
Jared J Registered Member Join Date: Sep 2009 Location: Virginia Beach, VA Posts: 431	Well, from what I've read they are very good about replacing pumps as some of the Resun pumps have been found to be defective.

11/02/2009, 11:49 AM	#761
putz28 Registered Member Join Date: May 2005 Posts: 17	The pump just needing a little cleaning, is working fine. Cheers.

11/02/2009, 07:33 PM	#762
reefguard Registered Member Join Date: Apr 2006 Location: Fairfield California Posts: 242	I am about to pick up a used in-280 tomorrow for $250. I have yet to see the skimmer and the guy says he only used it in 2 mos. Who has got one and what are your thoughts about the skimmer. It is going to 180 gallon mix reef. total water of 200 gallons. Thanks Noel

11/03/2009, 08:27 PM	#763
reefguard Registered Member Join Date: Apr 2006 Location: Fairfield California Posts: 242	Well, since I didn't get any inputs I pulled the trigger anyways. This thing is BIG. I've got it set up and will keep you guys posted.

11/03/2009, 08:35 PM	#764
ironwill723 Registered Member Join Date: Oct 2007 Posts: 847	I have a 280. Works great. Very pleased.

11/04/2009, 02:28 PM	#766
Jared J Registered Member Join Date: Sep 2009 Location: Virginia Beach, VA Posts: 431	You could do the mod and pick up the new impeller when they come in. It seems that the Vertex line is becoming quite a hit as everyone is starting to sell out of skimmers and parts. Hopefully that's a good thing.

11/04/2009, 03:33 PM	#768
reefguard Registered Member Join Date: Apr 2006 Location: Fairfield California Posts: 242	How about ceramic shafts for the pump for the in-280. I juist broke it.

11/04/2009, 03:42 PM	#770
frenchie Registered Member Join Date: Jun 2006 Location: granite city, IL Posts: 5,732	i don't think they ever changed insump 80 design only the other models, i still use my gen I 180 and love it, soon as xmas passes i will buy newer model. __________________ Darrick slash member 24 gallon nano cube, LED lights, zoanthids, shrooms Current Tank Info: 93 gallon cube, ecotech LED, swc 160 cone skimmer, lots of softies

11/04/2009, 03:43 PM	#771
NyReefNoob Registered Member Join Date: Nov 2006 Location: peekskill, ny Posts: 1,144	ok 2 months into having the in 180 still loving it, but really feel the pump isnt enough for it, having to close pipe 3/4's of the way, tempted to get the next size up skimmers pump and try it out __________________ custom 45g cube all in one, nano box custom led, with two powerbrites, mp10w, ac jr. ,bubble magnus triple doser, bm nac5 hob skimmer My dad always said the only stupid questions are the ones not asked Current Tank Info: 80g 3x2x22"

11/04/2009, 03:53 PM	#772
DragonFish Unregistered Member Join Date: Aug 2001 Location: Pleasant Prairie, WI Posts: 1,993	So does that mean I'm just missing items? My airline isn't long enough to go all the way up to the cap like the one above, so it just seems fishy. __________________ We have enough youth, how about a fountain of smart? You had me at bacon.

11/04/2009, 07:39 PM	#774
reefguard Registered Member Join Date: Apr 2006 Location: Fairfield California Posts: 242	Don't you guys think running the airline hooked up to the elbow restricts the air flow? I am running mine not connected right now and hooked up the air meter and getting about 27 lpm. Is that what you I am supposed to get out of this pump?