|
02/04/2012, 02:21 PM | #1 |
Registered Member
Join Date: Mar 2008
Location: jACKSON NJ.
Posts: 155
|
Program help for Kalk
Anyone know how to restrict my on time for kalk additions?
Unless is there a way to turn off if ph rises more then 1.0 within 1 hr? This is my programming so far but what has happened is the ph can fluctuate too much. I use two little fishies kalk reactor. Fallback OFF If pH < 08.30 Then ON If Time 18:00 to 23:59 Then OFF If SwitchA3 OPEN Then OFF If SwitchA2 OPEN Then OFF If pH > 08.35 Then OFF Thanks |
02/04/2012, 05:50 PM | #2 |
Registered Member
Join Date: Mar 2005
Location: Huntsville, AL
Posts: 2,645
|
The easiest thing would be to use the Min Time command. Add the following to the end of the code:
Min Time 10:00 Then OFF This will keep the Kalk OFF for at least 10 minutes before it can turn ON again. Adjust the time as needed. An alternative would be to use the OSC command in place of the If pH ... ON statement: OSC 000/10:00/50:00 Then ON This would dose for up to 10 minutes out of every hour, unless one of the OFF commands is true. Todd
__________________
Amendment IX The enumeration in the Constitution, of certain rights, shall not be construed to deny or disparage others retained by the people. Current Tank Info: 125g Reef Last edited by swearint; 02/04/2012 at 05:59 PM. |
02/06/2012, 04:14 PM | #3 |
Registered Member
Join Date: Mar 2008
Location: jACKSON NJ.
Posts: 155
|
Thank you very much, just what I was looking for, the OSC command will work for me
|
02/07/2012, 08:08 AM | #4 |
Registered Member
Join Date: Jun 2005
Location: Boston
Posts: 595
|
Yeah I use OSC command and then have a bunch of things that can trigger it to be off. Like float switch in sump, salinity, pH. Multiple levels of protection.
|
|
|