Damaged power connection on 6055

maroun.c · 07/01/2012, 11:26 AM

Got this pump from a friend who apparently messed up the connections of this 6055.
pump still runs when I connect the power supply to it but I prefer not to risk connecting it to the controller.
does this power connection box come standalone as spare part or at least the ciurcuit inside it? I can have the connections made here.
Or does it come with a motor block replacement? I honestly prefer not to have to replace the whole motorblock for this.
can I just make a direct connection from the cable coming from controller to the yellow, white and grey cables? being accross the globe with no distributor or service center for Tunze makes it more difficult. I don't mind having the cables soldered by a professional locally if you can tell me which color cables to connect to which.

Thanks for the help

rvitko · 07/02/2012, 09:16 AM

The controller connection was removed, you will need this part which is a small circuit board with DIN cable. The best might be to see if the local distributor can get one or has a dead pump with a good end connector you can cut off and use. The 6055 and 6206.200 pump use the same end connector.

maroun.c · 07/02/2012, 03:39 PM

Thanks for the help.
There's no local distributor here. My only chance is by mail order from states or Germany. Can you indicate the part number if the missing board if it does come alone? Or do I need to order a complete Motor block if it comes with it? Thanks.

rvitko · 07/02/2012, 04:22 PM

My last contact with them was in 2010, the shop is Aqua-Marin, the owner is Abed Koleilat.

maroun.c · 07/02/2012, 10:22 PM

Thanks. Will try to see if they have it.

maroun.c · 07/04/2012, 04:25 AM

Contacted them and they don't have it in stock nor have a damaged one.
Anyway you can mail me a circuit board with the cable so I have them connected to my pumps cable or else maybe the circuit with indications on where each wire goes???
checked the price of the motor block and its close to the price of the pump itself so would you be able to mail it to an address in Lebanon, if not one in the States?

rvitko · 07/05/2012, 08:37 AM

If you have a friend or family in the US I can mail it to, I can do that. It would have the end of the cord so you can see the wire pattern.

maroun.c · 07/05/2012, 10:53 AM

Appreciate your help.
Will PM you the details ASAP.

maroun.c · 07/23/2012, 09:56 PM

Just received my spare part.
Thanks for your help Roger.

07/01/2012, 11:26 AM	#1
maroun.c Registered Member Join Date: Apr 2001 Location: Lebanon Posts: 5,667	Damaged power connection on 6055 Got this pump from a friend who apparently messed up the connections of this 6055. pump still runs when I connect the power supply to it but I prefer not to risk connecting it to the controller. does this power connection box come standalone as spare part or at least the ciurcuit inside it? I can have the connections made here. Or does it come with a motor block replacement? I honestly prefer not to have to replace the whole motorblock for this. can I just make a direct connection from the cable coming from controller to the yellow, white and grey cables? being accross the globe with no distributor or service center for Tunze makes it more difficult. I don't mind having the cables soldered by a professional locally if you can tell me which color cables to connect to which. Thanks for the help __________________ 390 G mixed reef build Current Tank Info: 390G mixed reef

07/02/2012, 09:16 AM	#2
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 30,854	The controller connection was removed, you will need this part which is a small circuit board with DIN cable. The best might be to see if the local distributor can get one or has a dead pump with a good end connector you can cut off and use. The 6055 and 6206.200 pump use the same end connector. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish

07/02/2012, 03:39 PM	#3
maroun.c Registered Member Join Date: Apr 2001 Location: Lebanon Posts: 5,667	Thanks for the help. There's no local distributor here. My only chance is by mail order from states or Germany. Can you indicate the part number if the missing board if it does come alone? Or do I need to order a complete Motor block if it comes with it? Thanks. __________________ 390 G mixed reef build Current Tank Info: 390G mixed reef

07/02/2012, 04:22 PM	#4
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 30,854	My last contact with them was in 2010, the shop is Aqua-Marin, the owner is Abed Koleilat. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish

07/02/2012, 10:22 PM	#5
maroun.c Registered Member Join Date: Apr 2001 Location: Lebanon Posts: 5,667	Thanks. Will try to see if they have it. __________________ 390 G mixed reef build Current Tank Info: 390G mixed reef

07/04/2012, 04:25 AM	#6
maroun.c Registered Member Join Date: Apr 2001 Location: Lebanon Posts: 5,667	Contacted them and they don't have it in stock nor have a damaged one. Anyway you can mail me a circuit board with the cable so I have them connected to my pumps cable or else maybe the circuit with indications on where each wire goes??? checked the price of the motor block and its close to the price of the pump itself so would you be able to mail it to an address in Lebanon, if not one in the States? __________________ 390 G mixed reef build Current Tank Info: 390G mixed reef

07/05/2012, 08:37 AM	#7
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 30,854	If you have a friend or family in the US I can mail it to, I can do that. It would have the end of the cord so you can see the wire pattern. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish

07/05/2012, 10:53 AM	#8
maroun.c Registered Member Join Date: Apr 2001 Location: Lebanon Posts: 5,667	Appreciate your help. Will PM you the details ASAP. __________________ 390 G mixed reef build Current Tank Info: 390G mixed reef

07/23/2012, 09:56 PM	#9
maroun.c Registered Member Join Date: Apr 2001 Location: Lebanon Posts: 5,667	Just received my spare part. Thanks for your help Roger. __________________ 390 G mixed reef build Current Tank Info: 390G mixed reef