|
12/07/2012, 05:18 PM | #1 |
Registered Member
Join Date: Apr 2009
Posts: 140
|
Tying Fans to Lights
This is probably a really easy one, so forgive me in advance.
I just installed some case fans to help keep my lights cool and my tank temps lower. Can someone give me the code they recommend to turn them on with my lights? Right now, I have this. Fallback ON If Temp > 77.0 Then ON If Temp < 76.0 Then OFF ----------------- My light outlets are called: Light2-Bulb or Light2-Bulb - (4_2) Do I put that before or after my temp codes? How should it read? Like this? If Light2-Bulb is ON, then ON Do I have that right? |
12/07/2012, 05:32 PM | #2 |
Fish Freak
Join Date: Aug 2009
Location: Spring Hill, FL
Posts: 1,136
|
Fallback ON
If Outlet Lights = ON Then ON If Outlet Lights = OFF Then OFF
__________________
Kris - 200 Gallon Baby Reef Current Tank Info: 225 Upgrade Setup 11/17/2012 72x27x27 - Custom 40g sump/Diablo DCS-250int skimmer/Blueline HD40x/2 MP40's/Tunze ATO/2 Part/BRS RODI/ Neptune apex, WXM/3 Radium 250w Galaxy Ballast/8 39w T5's/Litermeter III/Aquavitro Salinity/20%WC/Carbon/GFO/Vinegar |
12/07/2012, 05:48 PM | #3 |
Registered Member
Join Date: Mar 2005
Location: Huntsville, AL
Posts: 2,645
|
The syntax is:
If Outlet Light2-Bulb = ON Then ON Code:
Fallback ON If Temp > 77.0 Then ON If Temp < 76.0 Then OFF If Outlet Light2-Bulb = ON Then ON Todd
__________________
Amendment IX The enumeration in the Constitution, of certain rights, shall not be construed to deny or disparage others retained by the people. Current Tank Info: 125g Reef |
12/07/2012, 07:48 PM | #4 |
Registered Member
Join Date: Apr 2009
Posts: 140
|
Thanks for the help!
|
|
|