Reef Central Online Community
Live Aquaria

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > Sponsor Forums > Reef Breeders LEDs
Register Blogs FAQ Calendar Mark Forums Read

Notices

Reply
Thread Tools
Old 05/01/2013, 07:39 PM   #1
Reef_Breeders
Sponsor
 
Reef_Breeders's Avatar
 
Join Date: Jan 2013
Posts: 1,836
Mounting Hole Distance

A couple people requested measurements;
So I will start with these:
Photon16: 8 1/2" between the mounting screws
Photon24:12 3/4" between the mounting screws
Photon32:21 1/4" between the mounting screws
Value: 8" between the mounting screws


__________________
Thank You,
Logan Vanghele
Owner
Reef Breeders LLC
Reef_Breeders is offline   Reply With Quote
Old 05/01/2013, 08:28 PM   #2
Mikgyver
Registered Member
 
Join Date: Mar 2013
Location: South Florida
Posts: 35
Thanks again Logan. You have been very helpful throughout this process.


Mikgyver is offline   Reply With Quote
Old 05/01/2013, 09:47 PM   #3
Mikgyver
Registered Member
 
Join Date: Mar 2013
Location: South Florida
Posts: 35
One last question Logan... What size/thread is used on the hanging system so I can replace them with a bolt to hang from my t-track??


Mikgyver is offline   Reply With Quote
Old 05/02/2013, 09:48 AM   #4
thallone
Registered Member
 
thallone's Avatar
 
Join Date: Feb 2001
Location: Des Moines, Ia
Posts: 266
Thanks for the info. Followup: What is the distance side-to-side between the screws?


thallone is offline   Reply With Quote
Old 05/02/2013, 01:01 PM   #5
KMendala77
Registered Member
 
KMendala77's Avatar
 
Join Date: Mar 2013
Location: Thompson, CT
Posts: 13
How about the spacing front to back?


KMendala77 is offline   Reply With Quote
Old 05/02/2013, 02:27 PM   #6
thallone
Registered Member
 
thallone's Avatar
 
Join Date: Feb 2001
Location: Des Moines, Ia
Posts: 266
Red face

Quote:
Originally Posted by KMendala77 View Post
How about the spacing front to back?
Yeah, looking at my post, that's what I meant.


thallone is offline   Reply With Quote
Old 08/11/2013, 05:34 AM   #7
dmh8801
Registered Member
 
dmh8801's Avatar
 
Join Date: Jun 2013
Location: Lakeland, FL
Posts: 99
Photon24: The top part of the studs, where the cables screw on, is a 8mm x 1.0 thread.


Spent a half hour sorting through just about every nut I had before saying screw it and going to home depot.

Hopefully saves someone else a little time in the future.


dmh8801 is offline   Reply With Quote
Old 09/08/2013, 05:45 PM   #8
Reef_Breeders
Sponsor
 
Reef_Breeders's Avatar
 
Join Date: Jan 2013
Posts: 1,836
The Photon48 is as follows:

Inner hanging set: 17 and 7/16" OC
Outer hanging Set: 35 and 5/8" OC

The Nova A4:

5.25" OC


__________________
Thank You,
Logan Vanghele
Owner
Reef Breeders LLC
Reef_Breeders is offline   Reply With Quote
Old 10/06/2014, 12:58 AM   #9
Ed Kazz
Registered Member
 
Ed Kazz's Avatar
 
Join Date: Mar 2008
Location: Northeastern PA
Posts: 296
Are the studs on the protons (32) removeable ?
Are they held on fixture with a nut (on the inside).
I am using a rail system and would like to use a bolt(screw) to mount them to.

Thanks
Ed


Ed Kazz is offline   Reply With Quote
Old 10/09/2014, 11:19 AM   #10
Reef_Breeders
Sponsor
 
Reef_Breeders's Avatar
 
Join Date: Jan 2013
Posts: 1,836
Yes, they are removeable and held on with an interior bolt.


__________________
Thank You,
Logan Vanghele
Owner
Reef Breeders LLC
Reef_Breeders is offline   Reply With Quote
Old 03/19/2017, 08:20 PM   #11
mindi
Registered Member
 
Join Date: Jul 2013
Location: Mornington Victoria Australia
Posts: 531
Logan

Are the V2 fixing points located the same as the V1 on the 48/50 anyway..?


__________________
Duncans,Briarerum,Sarcphytons,Red Lobo, Elegance,Pectinia,Scolymia,Ctenactis,Barrier Reef Clowns,Blue,Yellow,and Gold Shouldered Tangs,Coral Beauty,Banggai,Coris, Leopard and Striped Wrasse

Current Tank Info: Cade PR1500 with Seachem Kona Coast and Sanrise 120 LED
mindi is offline   Reply With Quote
Old 04/25/2017, 03:32 AM   #12
mindi
Registered Member
 
Join Date: Jul 2013
Location: Mornington Victoria Australia
Posts: 531
Sanrise measurements

For the Sanrise Plus 120 the lateral distance between hanging bolts is 1120mm centre to centre and the front to back distance is 151mm centre to centre.


__________________
Duncans,Briarerum,Sarcphytons,Red Lobo, Elegance,Pectinia,Scolymia,Ctenactis,Barrier Reef Clowns,Blue,Yellow,and Gold Shouldered Tangs,Coral Beauty,Banggai,Coris, Leopard and Striped Wrasse

Current Tank Info: Cade PR1500 with Seachem Kona Coast and Sanrise 120 LED
mindi is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:14 AM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2017 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright 1999-2014