|
07/16/2016, 06:46 PM | #1 |
Registered Member
Join Date: Mar 2011
Location: etiwanda, ca
Posts: 225
|
tunze nanostreams and profilux 3.1nex
hi,
can someone show me step by step how to connect and program my 2 tunze 6095s with m my profilux 3? I can't find any clear info anywhere. The pumps are both currently connected to my profilux via the tunze 1 and 2 cables via YL2 splitter to the L1 socket on my profilux. TY |
07/16/2016, 10:06 PM | #2 |
GHL Mitras LX7 Club
|
1. Go to the 1-10v interface settings and set L1 and L2 to "Stream pump" and voltage to 3-8V.
2. Go to the Stream settings located in the Extras section and assign the pumps to a group. If you want to have both pumps on the same group, select a pump group and assign the pumps to that group. 3. Program the pumps in the same screen and click save. Just remember that Tunze 1 will function for "Odd" numbered L channels and T2 for "Even" numbered L channels.
__________________
-ReefRockerLive Current Tank Info: Rimless 67g | GHL Profilux 3.1T eX | 2x GHL Doser 2 dosers | 2xGHL Mitras LX7 LED | Abyzz a100 | Bubble King DC 150 | 2x Vortech MP40w QD | Fauna Marin Zeomatic 2.2ltr | Fauna Marin Zeolight System | Fauna Marin Balling Light Method |
07/17/2016, 08:01 AM | #3 | |
Registered Member
Join Date: Mar 2011
Location: etiwanda, ca
Posts: 225
|
Quote:
Thanks! Sent from my iPhone using Tapatalk |
|
07/18/2016, 01:18 PM | #4 |
Registered Member
Join Date: Mar 2011
Location: etiwanda, ca
Posts: 225
|
Any pointers on how to program pumps in alternating fasion to create waves?
Can this be done while both pumps are connected to L1/2 using the YL2 splitter? Sent from my iPhone using Tapatalk |
07/18/2016, 01:22 PM | #5 | |
RC Sponsor
Join Date: Mar 2009
Location: Fort Myers, FL
Posts: 319
|
Quote:
Check out this video: https://www.youtube.com/embed/8eCp0KGWbf0 That's on my Reefer 450 (5ft tank) w/ a 6055(left) and a 6095(right) - using a 0.7/0.9 second timer. StreamGroup #x Mode: Permanent Opposite Wave: Right Angle MIN: 0.7 MAX: 0.9 Each pump is set to 0% & 100%.
__________________
Marco Royal Exclusiv USA - Fort Myers, FL Operations For All Royal Exclusiv / Bubble King questions please refer to our Sponsor forum: http://reefcentral.com/forums/forumdisplay.php?f=745 Current Tank Info: RS Reefer 450 Last edited by ReefClownMIA; 07/18/2016 at 01:39 PM. |
|
07/18/2016, 08:35 PM | #6 |
Registered Member
Join Date: Mar 2011
Location: etiwanda, ca
Posts: 225
|
Setit up as recommended,but pumps now just stay off even though ghl control center shows the voltages alternating between the 2 pumps
Sent from my iPhone using Tapatalk |
07/18/2016, 09:12 PM | #7 | |
RC Sponsor
Join Date: Mar 2009
Location: Fort Myers, FL
Posts: 319
|
Quote:
In my case, I'm using:
__________________
Marco Royal Exclusiv USA - Fort Myers, FL Operations For All Royal Exclusiv / Bubble King questions please refer to our Sponsor forum: http://reefcentral.com/forums/forumdisplay.php?f=745 Current Tank Info: RS Reefer 450 |
|
07/19/2016, 11:35 AM | #8 |
Registered Member
Join Date: Jul 2016
Location: Fort Myers, FL USA
Posts: 107
|
|
07/24/2016, 01:25 PM | #9 | |
Registered Member
Join Date: Jul 2016
Location: Fort Myers, FL USA
Posts: 107
|
Quote:
<iframe width="640" height="360" src="https://www.youtube.com/embed/8eCp0KGWbf0" frameborder="0" allowfullscreen></iframe> |
|
Thread Tools | |
|
|