|
05/03/2017, 03:26 PM | #1 |
Registered Member
Join Date: Jan 2015
Location: Mascoutah, IL
Posts: 464
|
Apex/Jebao programming
I just got the Jebao module for my Apex and I'm a little lost with programming this thing. Here's what I want to do with it, hopefully someone can help me...
I have 1 RW8 power head, and a DC9000 return pump. I want to run the RW8 on one channel, with a standard on/off wave program during the day and a low-flow night mode. I also want to kill it when I go into feed mode. I want to run the DC9000 return pump on the other channel, at 80% (I think it's at 80%, four of the six lights are on on the controller). I want to drop the return pump down to 50% when I go into feed mode. I hope that's not too confusing lol Thanks everyone! Bob
__________________
Tank is finally wet! USAF Veteran, 12 years Go Cardinals!! Current Tank Info: Marineland 93 gallon rimless cube, Radion LED/T5 Combo, Eshopps sump, Nyos skimmer, Apex controller |
05/04/2017, 11:25 AM | #2 |
Registered Member
Join Date: Jan 2015
Location: Mascoutah, IL
Posts: 464
|
Nobody??
__________________
Tank is finally wet! USAF Veteran, 12 years Go Cardinals!! Current Tank Info: Marineland 93 gallon rimless cube, Radion LED/T5 Combo, Eshopps sump, Nyos skimmer, Apex controller |
05/06/2017, 08:33 PM | #3 |
Registered Member
Join Date: Mar 2013
Posts: 35
|
Here is my programing just for one pump or one channel on the Jebao/Apex module
CirPump Fallback OFF Set CalmPump If Time 12:00 to 20:00 Then WavePump WavePump profile: Off time 0; On Time 10; Off Time 1; Min 0; Max 35 CalmPump profile: Off time 0; On Time 10; Off Time 1; Min 0; Max 20 |
05/06/2017, 08:35 PM | #4 |
Registered Member
Join Date: Mar 2013
Posts: 35
|
You need VDM module. VDM module will have 4 channel
Just create more profile for you need. And set the TIME programing on the VDM channel |
05/06/2017, 08:45 PM | #5 |
Registered Member
Join Date: Mar 2013
Posts: 35
|
These are the profile for the RW8:
On/Off profile: Off time 0; On Time 10; Off Time 1; Min 80; Max 80 (80 or what ever power you want) Calm/Night profile: Off time 0; On Time 10; Off Time 1; Min 0; Max 20 These are the outlet setup: Fallback OFF Set Calm/Night If Time 12:00 to 20:00 Then On/Off (Just changed the time) |
05/06/2017, 08:50 PM | #6 |
Registered Member
Join Date: Mar 2013
Posts: 35
|
SumpPump
Fallback ON Set 80Profile If FeedA 000 Then 50Profile If FeedB 000 Then OFF If FeedC 000 Then OFF If FeedD 000 Then OFF If Output AllPumpCtrl = OFF Then OFF Now go set profile for 80Profile and 50Profile |
|
|