|
09/01/2017, 09:33 AM | #1 |
Registered Member
Join Date: Mar 2002
Location: Houma, LA
Posts: 4,743
|
Redox reading negative
My redox is giving me negative values. I calibrated the probe last night and it did not fix the problem. I am on a P4 with firmware 7.05.
__________________
Mark Beware the light at the end of the tunnel. Sometimes it's a train. Current Tank Info: 120, LED, Bare Bottom, SPS/LPS |
09/01/2017, 09:42 AM | #2 |
Registered Member
Join Date: Jul 2016
Location: Fort Myers, FL USA
Posts: 107
|
Just to make sure, have you double checked the probe is in the correct spot?
__________________
Marco GHL USA - Fort Myers, FL Operations For All GHL questions please refer to our Sponsor forum: http://reefcentral.com/forums/forumdisplay.php?f=527 |
09/01/2017, 09:53 AM | #3 |
Registered Member
Join Date: Mar 2002
Location: Houma, LA
Posts: 4,743
|
Yes I did. I can check again when I get home. All the other probes are giving me reasonable values.
__________________
Mark Beware the light at the end of the tunnel. Sometimes it's a train. Current Tank Info: 120, LED, Bare Bottom, SPS/LPS |
09/06/2017, 08:18 PM | #4 |
Registered Member
Join Date: Mar 2002
Location: Houma, LA
Posts: 4,743
|
It is reading positive now. I unplugged and replied and it swapped. I would if maybe the tip was dry?
On a side note, I installed my propeller breeze today. Nice fan unit, but the mounts suck. The designers missed the boat on that one.
__________________
Mark Beware the light at the end of the tunnel. Sometimes it's a train. Current Tank Info: 120, LED, Bare Bottom, SPS/LPS |
|
|