|
09/28/2017, 04:44 PM | #1 |
Registered Member
Join Date: Aug 2017
Location: Elgin
Posts: 23
|
Plumbing new tank
I have a 100g tank I just drilled 2 1.5 inch bulkheads for herbie style standpipe. my return will come from the pump to a "T" that will then plumb to both sides of the tank. what size pipe do I need for that return return?
|
09/28/2017, 05:01 PM | #2 |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
What return pump?
In general use the max size or 1 up from what the pump is rated to.. SO if the pump has a 3/4" output then I personally would use 1" at least up to the tee then you can do 2 x 3/4" over the top returns..
__________________
Who me? |
09/28/2017, 05:04 PM | #3 |
I <3 Acros
Join Date: May 2010
Location: Long Island, NY
Posts: 2,523
|
You will want to match your pumps output pipe size or bigger as much as possible, and then usually it converts to 3/4"/loc-line when getting to the tank.
__________________
80g Deep Blue Rimless - http://www.reefcentral.com/forums/showthread.php?t=2651295 225g Reef Savvy SPS Dominant - Retired http://www.reefcentral.com/forums/showthread.php?t=1945361 |
09/28/2017, 08:20 PM | #4 |
Registered Member
Join Date: Aug 2017
Location: Elgin
Posts: 23
|
Thanks guys, I ordered a Jebao DCS 9000 for the return. i'm not sure the max size but i think 1"
|
|
|