Reef Central Online Community
Live Aquaria

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > Sponsor Forums > Royal Exclusiv / Bubble King
Register Blogs FAQ Calendar Mark Forums Read

Notices

Reply
Thread Tools
Old 10/15/2017, 03:45 PM   #1
doubleohwhat
Registered Member
 
Join Date: Mar 2011
Posts: 83
Manual for fleece roller

Is there a manual for the fleece roller system? I can't seem to find one online.

I want to make sure the timer is set correctly and I need to know what level to set the sensor on the outset of the sump at. It was loose when the sump arrived.


doubleohwhat is offline   Reply With Quote
Old 10/15/2017, 07:33 PM   #2
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 12,365
Quote:
Originally Posted by doubleohwhat View Post
Is there a manual for the fleece roller system? I can't seem to find one online.

I want to make sure the timer is set correctly and I need to know what level to set the sensor on the outset of the sump at. It was loose when the sump arrived.
If you just bought the new Dreambox, there should be a manual for the timer in the bag that was included inside the dreambox. You have 2 settings. One for the amount of time that the motor waits after the filter compartments capacitive level senor detects a water level increase. The second setting his how long the motor runs for once it’s triggered. This will determine how much fleece you role out which is dependant on your preference. You can test your settings by unscrewing the thumb screw that holds the sensor in place on the left side of the dreambox. Then remove the sensor from the holder and put your hand over the side that faces the inside of the sump. That will trigger the timer and ultimately the motor. Now keep in mind that the countdown portion of the timer is also a preference thing. You need to ask yourself whether you want the motor to role out new material as soon as it senses a level change or wait a few minutes or more before rolling out new material. Also note that the level sensor can be adjusted up or down depending on your desired sump level. As such, there is no “right level. It will need to be adjusted based on the level you want your sump at. You can test this and then pop the roller out of its holder in the drying chamber and role it back out if you need to.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Old 10/16/2017, 10:19 AM   #3
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 12,365
Here is a quick video that shows how to setup the fleece timer and sensor.
https://youtu.be/qnKFzzQg5ss


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Old 10/16/2017, 06:15 PM   #4
doubleohwhat
Registered Member
 
Join Date: Mar 2011
Posts: 83
Thanks! I looked through everything that came with the sump and there's a manual for everything but the timer.


doubleohwhat is offline   Reply With Quote
Old 10/16/2017, 06:20 PM   #5
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 12,365
The video along with what I mentioned above covers everything you need to know but for reference, here is a manual for the timer controller itself. More complicated than it needs to be and the switches are already setup for this application but here it is anyway.
https://www.panasonic-electric-works...ds_lt4h_en.pdf


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:57 AM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2017 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2014