purity monitor setting

inerratum · 02/10/2005, 12:42 AM

in the manual http://www.spectrapure.com/manuals/EPMonitor.pdf

figure 4 says that switch #7 is in the "on" position but the blue plastic piece shows that switch 7 is actually in the "off" position and all the other switches are in the "on" position. Is this an error in the manual or are we supposed to ignore the "off" text on the blue piece?

SpectraPure · 02/11/2005, 11:27 AM

Fig. D of the referenced manual has Switch #7 shown in "ON" Position. In that case, the switch is depressed under the numeral '7' and all the others are depressed towards 'OFF'.

Switch #7 on your unit should be pushed toward the numeral '7' and all the others are pushed away from 'ON'.

Sorry for the confusion. We need a new picture in the manual.

Scott
SpectraPure, Inc.

02/10/2005, 12:42 AM	#1
inerratum Registered Member Join Date: Aug 2002 Location: Torrance CA Posts: 305	purity monitor setting in the manual http://www.spectrapure.com/manuals/EPMonitor.pdf figure 4 says that switch #7 is in the "on" position but the blue plastic piece shows that switch 7 is actually in the "off" position and all the other switches are in the "on" position. Is this an error in the manual or are we supposed to ignore the "off" text on the blue piece?

02/11/2005, 11:27 AM	#2
SpectraPure RC Sponsor Join Date: Jun 2003 Posts: 3,021	Fig. D of the referenced manual has Switch #7 shown in "ON" Position. In that case, the switch is depressed under the numeral '7' and all the others are depressed towards 'OFF'. Switch #7 on your unit should be pushed toward the numeral '7' and all the others are pushed away from 'ON'. Sorry for the confusion. We need a new picture in the manual. Scott SpectraPure, Inc. __________________ *Innovators in water technology.* Since 1985!