|
![]() |
|
|
#1 |
|
Registered Member
Join Date: Feb 2004
Location: Columbus,GA.
Posts: 426
|
timer control
Curt
I have a ?. I would like for my ozone to come on for 15 min a day and still controll the orp with ozone. I tried the if time statement just like I have the lights but it does not work. The reason I'm doing this is my orp hangs around 380 and the ozone is set for 350-375 once it made it there it never seems to come down so now the ozone never comes on. I was hoping to have it run at least a little bit for the water clarity. Jerry |
|
|
|
|
|
#2 |
|
Make my Funk a P-Funk
Join Date: Feb 2003
Location: Electric Avenue
Posts: 5,139
|
I just asked a very similar question. It might help you too. Just change a few variables.
http://www.reefcentral.com/forums/sh...hreadid=610208
__________________
**************** "Work hard, rock hard, eat hard, sleep hard, grow big, wear glasses if you need 'em." -- The Webb Wilder Credo -- don't go ninjin' nobody that don't need ninjin'! Current Tank Info: 220g custom plywood. SPS heavy with Sequence Hammerhead return with 4-Way OM. Tunze 6100, 6200 and Wavebox. 5000btu DIY Chiller. Lighting is 10K mh 250W / VHO Actinic Skimer - H&S A200-2x1260 |
|
|
|
|
|
#3 |
|
Registered Member
Join Date: Mar 2004
Location: Waterloo, Ont. Canada
Posts: 1,133
|
This should work for you:
If Time > 12:00 Then OZE ON If Time > 12:15 Then OZE OFF If ORP > 380 Then OZE OFF Max Change 010 M Then OZE OFF You may want to change the time ozone is dosed or the 380 to some other number. |
|
|
|
![]() |
| Thread Tools | |
|
|