|
09/30/2005, 05:35 AM | #1 |
Registered Member
Join Date: Jul 2004
Location: Minneapolis/St. Paul Metro area
Posts: 145
|
Calibartion drifiting off on ACII
My ph and temp calibration consistently drifts off within a couple weeks. I have replaced probes and the same thing happens. While a seperate ph monitor stays put, my ACII reading are of by +0.4. Recalibrating and probe cleaning haven't solved the problem yet.
Any ideas ? |
09/30/2005, 09:34 AM | #2 |
RC Sponsor
Join Date: Aug 2001
Location: San Jose, CA
Posts: 4,311
|
If you have a serial cable plugged in, then I suspect a ground loop. Use an isolator (SERIPC9) if you are going to have the serial cable permanently plugged in your controller and PC.
Curt |
09/30/2005, 09:36 AM | #3 |
Registered Member
Join Date: Jul 2004
Location: Minneapolis/St. Paul Metro area
Posts: 145
|
nope, no cable plugged in.
|
09/30/2005, 10:00 AM | #4 |
RC Sponsor
Join Date: Aug 2001
Location: San Jose, CA
Posts: 4,311
|
Look at the datalogs in the AquaController and see if the drift is correlated w/ something turning on/off. If you can't find anything please give us a call 408-578-3022.
Curt |
10/19/2005, 07:08 AM | #5 |
Premium Member
Join Date: Jun 2002
Posts: 567
|
Ever figure out why?
Thanks |
|
|