Ganged Air Valve Base (3D print)
This is a base to hold the Pawfly 5-Way Aquarium Air Flow Control Lever Valve Distributor Splitter available from many places, including: https://www.amazon.com/gp/product/B073CST36X
I modeled the valve set then subtracted it from a solid, making a socket. I set the top of the block just above the centerline of the horizontal pipe, so that it clicks in to place for a solid friction fit. http://www.barraquatic.com/images/di...lve_holder.png http://www.barraquatic.com/images/di...ir_Valve-2.png http://www.barraquatic.com/images/di...ir_Valve-3.png The fit ended up a bit too snug, so I heated up the base with a heat gun and was able to easily press in the valve. It was snug, but I was concerned that it would fall out when I was pulling on the hoses, so I siliconed it in. Should be solid now. http://www.barraquatic.com/images/di...ir_Valve-4.jpg http://www.barraquatic.com/images/di...ir_Valve-5.jpg Fits #6 FH wood screws. Thingiverse link: https://www.thingiverse.com/thing:2661081 |
What are you using all this air for?
|
Setting up a four station Phyto grow out shelf. Need to gently bubble air in to four beakers.
http://www.reefcentral.com/forums/sh...2#post25277472 |
Very cool!
|
All times are GMT -6. The time now is 09:19 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by
Advanced User Tagging v3.3.0 (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.