Quote:
Originally Posted by neiltus
Ok, so you have a riser coming out a few inches of the bushing and you put a female barb on the riser to connect to the silicone? I think that is what I see in your photo.
|
Pretty much.
So the sprinkler pipes are usually double threaded .... Short pieces anywhere from 1" - 12" I think.
On the 50w I had a 2-4" piece, and cut it in 1/2, glued the slip into the bushing, and "threaded" the silicon hose onto the threaded pipe. Held fine!
Now on the 80w, I used a thread adapter that I glued into the 1" slip bushing, the. Used a 3" piece of the double threaded pipe and threaded that into the reducer bushing
Sent from my iPhone using Tapatalk