[glennf]

Wednesday, 15 September 2021 #Panoramareef - drilling 4 holes. Today the diamond glass drills finally arrived. I was waiting to be able to continue. First I had to make a drilling template from plywood and mount it in the right place. To allow fish to swim back and forth from section1 to section2, I made two 100mm holes to connect the aquariums. For this, I had to drill four 100mm holes in 10mm glass. It took me 2 hours because I was too careful. Once I got the hang of it, it was 10-15 minutes per hole.

After alignment, I drilled the end of section 2 flat on the table

*The next step is to prepare the glass to seal section 2.








https://youtube.com/user/glennfhome