Woohooo!
My package from MarineDepot arrived today!
Here's what it had inside!
I've got my flex-PVC for the return lines. The 4 bulkheads you see are 3/4" slip-slip. They will be the 2 returns from the sump, as well as 2 for the closed loop.
The MJ900 is just for mixing water...the stock pump I pulled out of my BioCube that I had been using to mix water failed. (good thing I replaced it!)
Purigen for the BioCube. I love that stuff, it really seems to polish the water and increase clarity!
I think I'm going to oversize my drain a bit and use a 1" bulkhead there with a 1.5" PVC durso standpipe.
I still can't decide if I should feed the closed loop with a 1" or a 3/4" bulkhead. Any thoughts? Bigger is better right?