View Single Post
Unread 05/16/2009, 11:34 AM   #141
fourts1
Registered Member
 
Join Date: Jan 2005
Posts: 52
Roger

Just bought a used wavebox(6260.10 pump) and when I plugged it in it did not work and transformer and driver got very hot immediately. No driver alarm sounded. Took pump apart and cleaned(extensive calcium deposits present). Swapped out driver(7240.27) with my 6200 and wavebox worked for two hours then driver alarm sounded. Recleaned pump and driver alarm again sounded within 5 minutes. Took drive unit and bushings from the 6200 and put them in the wavebox 6260.10 and alarm again sounded within five minutes although pump was functioning. When I put the driver and drive unit back on the 6200 they work fine. What do you suggest I do?


fourts1 is offline   Reply With Quote