Reef Central Online Community - View Single Post

wilsonreefs · 04/23/2021, 04:26 PM

Sorry for the delay...
Here you go

I used the neodymium magnets that were 1/8" thick by 3/4" x 3/4". I used two magnets on each end and glued them on with a two part epoxy. Try to make the magnets spread equal to the length of the spinner. I used the 1" spinner.

04/23/2021, 04:26 PM	#6
wilsonreefs Registered Member Join Date: Jun 2010 Location: Jonesboro, Ar Posts: 284	Sorry for the delay... Here you go I used the neodymium magnets that were 1/8" thick by 3/4" x 3/4". I used two magnets on each end and glued them on with a two part epoxy. Try to make the magnets spread equal to the length of the spinner. I used the 1" spinner. Last edited by wilsonreefs; 04/23/2021 at 04:35 PM.