View Single Post
Unread 12/27/2015, 06:40 PM   #13
RC Sponsor

slief's Avatar
Join Date: Sep 2009
Posts: 14,173
Originally Posted by biecacka View Post
Thank you. When you say wetten it you mean add more water into the chamber, correct?

Yes. Closing the wedge pipe will raise the water level in the skimmer body causing the skimmate to be more wet and not stay in a foam state as long. You could also bump the pump speed by 1 watt but I like the foam I see there so if anything, I would close the wedge pipe a tiny bit and see what that does. In the mean time, I would put the lid on and see how it does as it is. If you find the foam filling the cup up and coming out the vent holes then close the wedge pipe ever so slightly. It won't take much but a fraction of a turn. That heavy foam is an indicator or plenty of DOC's. It's looking good though. Much better foam than the videos I saw with it at the high pump speed.

Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum:

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread:
slief is offline   Reply With Quote