Reef Central Online Community

Go Back   Reef Central Online Community > Sponsor Forums > Royal Exclusiv / Bubble King
Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Unread 03/30/2021, 11:01 AM   #1
nly04
Registered Member
 
nly04's Avatar
 
Join Date: May 2013
Location: Union City, SF bay area
Posts: 1,062
Extention adapter

Hi Slief, I just pick up a BK DC180 with red dragon mini speedy DC pump for my 150gal DT. I am run into an issue that I cannot mount the controller outside the stand. The controller is too big that I can not slide it on the back of the stand. At the moment it temporary inside the stand. Most of other skimmer has the adapter between the pump and the controller like in the picture. Is it possible to install something like that?

Also my skimmer is running at lowest speed and currently at 15W. Skimmer is at 7.25” of water. How long will it take to break in and when do I need to adjust the power? What is the optimal power setting for this skimmer? I have total around 50inches of fish at the moment.


Attached Images
File Type: jpg CDC59656-8AAB-4D8D-87A0-248E169525DA.jpg (40.5 KB, 9 views)
nly04 is offline   Reply With Quote
Unread 03/30/2021, 11:48 AM   #2
Vinny Kreyling
Registered Member
 
Vinny Kreyling's Avatar
 
Join Date: Nov 2002
Location: Miller Place, NY
Posts: 7,206
Not sure Scott would agree but it is possible as long as the plug is for the correct amount of wires. You know how to solder correct?


__________________
250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps.
Vinny Kreyling is offline   Reply With Quote
Unread 03/30/2021, 12:36 PM   #3
nly04
Registered Member
 
nly04's Avatar
 
Join Date: May 2013
Location: Union City, SF bay area
Posts: 1,062
Quote:
Originally Posted by Vinny Kreyling View Post
Not sure Scott would agree but it is possible as long as the plug is for the correct amount of wires. You know how to solder correct?
Yes, I know how to solder and more. Just want to know if anyone done this before, also I don't want it to void warranty.


nly04 is offline   Reply With Quote
Unread 03/30/2021, 04:32 PM   #4
nly04
Registered Member
 
nly04's Avatar
 
Join Date: May 2013
Location: Union City, SF bay area
Posts: 1,062
Thinking to get this part. What do you think? https://www.amazon.com/gp/product/B0...SX117263E&th=1


nly04 is offline   Reply With Quote
Unread 03/30/2021, 04:58 PM   #5
Vinny Kreyling
Registered Member
 
Vinny Kreyling's Avatar
 
Join Date: Nov 2002
Location: Miller Place, NY
Posts: 7,206
Should be fine if it fits the wiring.
Install far enough away from pump so no chance for water to make it there.


__________________
250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps.
Vinny Kreyling is offline   Reply With Quote
Unread 03/30/2021, 05:02 PM   #6
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Posts: 14,173
Is your pump the old version that has the motor hardwired to the controller? If so, we don’t offer any options for you. The newer RD3’s all have a quick connect plug on them. My advice would be to keep the controller under the stand. Cutting the cord and extending the cable or adding a plug between the motor and controller will change the impedance of the connection. The RD3 is not a typical DC pump. It’s a high voltage variable speed AC pump. The controller is a computer and there is bi-directional communication between the controller and the motor. Adding a plug could impact the communication due to the impedance change which may have an adverse effect on the pump.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is offline   Reply With Quote
Unread 03/30/2021, 05:06 PM   #7
nly04
Registered Member
 
nly04's Avatar
 
Join Date: May 2013
Location: Union City, SF bay area
Posts: 1,062
By the way, this is my skimmer.


Attached Images
File Type: jpg 7463C047-B44F-4451-A717-3F7B8733804C.jpg (51.2 KB, 6 views)
File Type: jpg 364E66B0-6522-441B-AEBD-C78AACEB66F1.jpg (40.8 KB, 6 views)
nly04 is offline   Reply With Quote
Unread 03/30/2021, 05:09 PM   #8
nly04
Registered Member
 
nly04's Avatar
 
Join Date: May 2013
Location: Union City, SF bay area
Posts: 1,062
@slief. I see your point. Look like I don't have much option and will leave the controller inside the stand.

How long will it take to break in and when do I need to adjust the power? What is the optimal power setting for this skimmer? my skimmer is running at lowest speed and currently at 15W. Skimmer is at 7.25” of water. I have total around 50inches of fish at the moment.


nly04 is offline   Reply With Quote
Unread 03/30/2021, 06:06 PM   #9
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Posts: 14,173
Quote:
Originally Posted by nly04 View Post
@slief. I see your point. Look like I don't have much option and will leave the controller inside the stand.

How long will it take to break in and when do I need to adjust the power? What is the optimal power setting for this skimmer? my skimmer is running at lowest speed and currently at 15W. Skimmer is at 7.25” of water. I have total around 50inches of fish at the moment.
Ideal power setting is 18-22w. Break in period is about a week.

If you really want to add a connection, this would be about the best choice. It doesn’t require soldering and I am aware of others that have used this connector with success in the past. While neither myself or Royal Exclusiv advocate this as there IS risk of damaging your controller, this is about the best option.
https://www.youtube.com/watch?v=Uu7FVg9VbA8


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is offline   Reply With Quote
Unread 03/30/2021, 08:01 PM   #10
nly04
Registered Member
 
nly04's Avatar
 
Join Date: May 2013
Location: Union City, SF bay area
Posts: 1,062
Thank you Slief, I will look into that option.


nly04 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 04:38 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.