|
05/20/2016, 11:28 AM | #1 |
A-counting guy
Join Date: Jul 2004
Location: Ottawa, Ontario, Canada
Posts: 673
|
No capacitive touch
Wonderful. Two brand new Mitras 6200, one of which 3 arrows work and the other where only the up and right arrow work. Seriously, I cannot set my options because I cannot get to YES button to confirm. What am I doing wrong or is QC lacking? Yes, I am frustrated. For what I paid, this should not be happening. What am I suppose to do?
__________________
You can see my 400g build thread here: http://www.reefcentral.com/forums/showthread.php?t=2577596 Current Tank Info: 400g SPS and 75g non SPS |
05/20/2016, 11:37 AM | #2 |
Registered Member
Join Date: Jul 2015
Posts: 236
|
|
05/20/2016, 01:19 PM | #3 |
New Old School
Join Date: Feb 2012
Location: Luzerne County, PA
Posts: 3,293
|
I don't know that this would apply to you, but my dishwasher doesn't work with my fingers, yet works fine for everyone else. If I have a cloth (such as the sleeve of a shirt) between my finger and the button, it works fine. My Radions respond as expected, so I'm not sure what factors into it.
Hope you get it sorted out! |
05/20/2016, 02:25 PM | #4 | |
Registered Member
Join Date: Nov 2008
Location: Houston, TX
Posts: 10,344
|
Quote:
OP, GHL should take care of you. I haven't heard of this one before, just dumb luck I'm sure.
__________________
-dennis Elos Diamond 120xl | Elos Stand | Radion G4 Pros | GHL Profilux Controller | LifeReef Skimmer | LifeReef Sump Photos taken with a Nikon D750 or Leica M. |
|
05/20/2016, 09:46 PM | #5 | |
A-counting guy
Join Date: Jul 2004
Location: Ottawa, Ontario, Canada
Posts: 673
|
Quote:
__________________
You can see my 400g build thread here: http://www.reefcentral.com/forums/showthread.php?t=2577596 Current Tank Info: 400g SPS and 75g non SPS |
|
05/20/2016, 09:49 PM | #6 | |
A-counting guy
Join Date: Jul 2004
Location: Ottawa, Ontario, Canada
Posts: 673
|
Quote:
I figure things will work out. So long as I can access all the functions through GCC the capacitive touch is not quite as important.
__________________
You can see my 400g build thread here: http://www.reefcentral.com/forums/showthread.php?t=2577596 Current Tank Info: 400g SPS and 75g non SPS |
|
05/21/2016, 08:38 AM | #7 |
A-counting guy
Join Date: Jul 2004
Location: Ottawa, Ontario, Canada
Posts: 673
|
I just want to let you know that Vinny provided the solution for the touch pad. The keys can be calibrated via the GCC. You access Keys on the Extras tab. I selected 'Use own calibration' then started the Calibrate keys function. Worked like a charm. Kudos to Vinny and the support he is providing for GHL products. And for his patience with me.
__________________
You can see my 400g build thread here: http://www.reefcentral.com/forums/showthread.php?t=2577596 Current Tank Info: 400g SPS and 75g non SPS |
05/22/2016, 10:33 AM | #8 | |
Registered Member
Join Date: Feb 2009
Location: South Florida
Posts: 1,501
|
Quote:
+1. Vinny has been very helpful Great addition to GHL team
__________________
Doggydoc Current Tank Info: 75 Gallon Rimless Cube |
|
|
|