problem with EB8

[SPotter]

I just moved my sump and apex equipment to my basement. I am now having problems with trying to turn outlets on or off. If the outlet is on auto/on and I set it to off, it automatically bounces back to auto/on. This is happening with all settings...auto, man on and man off. No matter what the setting is or what I try to change it to, it always goes back to what the setting was before I tried to change it. Do I need to initialize the memory?:confused:

[RussM]

Steve, you have EB8 outlets with the exact same same as VarSpeed ports for your Tunze pumps. Make them unique.

For example, you might change the EB8 outlets from R_Tunze & L_Tunze to Tunze_R & Tunze_L

Duplicate outlet names have been known to cause similar behavior

[SPotter]

Russ.....you are the man! I thinks its time to make another donation to the reeftronics.net fund!!!!!!

[RussM]

So problem solved?

[SPotter]

Yes sir!!!!


Sent from my iPhone using Tapatalk