Can the AquaNotes connect via TCPIP to the Aqua Controller III?

simon.007 · 07/24/2005, 09:39 AM

Hi,
I am thinking of picking up the Aqua Notes but would like to know if the AquaNotes connect via TCPIP to the Aqua Controller III?

Thanks
Simon

rafal1676 · 07/24/2005, 05:54 PM

YES BUT YOU NEED AQUANOTES 3.1 OR 3.0C I DONT REMEMBER BUT WHEN YOU WILL BUY AQUANOTES CALL NEPTUNSYS AND TELL THEM THAT YOU NEED UPDATE FOR IT AND THEY WILL HELP YOU

kattner · 07/24/2005, 07:15 PM

Are you talking about the ACIIIPro or just an ACIII?

rafal1676 · 07/25/2005, 05:08 AM

its only acIII pro

kattner · 07/25/2005, 01:26 PM

ok, I see.

If you're using the ACIIIPro, you need Aquanotes 3.1 I believe and from there you just tell aquanotes what IP address the ACIIIPro is configured to and thats it.

Now, you can achieve TCP/IP access to the other aquacontrollers (that just have a serial interface) as well. You would need a host computer running Aquanotes connected to the aquacontroller via the serial interface. Then, on another computer (a desktop at work or a laptop if traveling for example), you would also run aquanotes as a client computer. You would configure aquanotes running on the client to log into the ip address of the server computer. You could then get full aquanotes functionality over the internet this way too.

the3dwizard · 07/27/2005, 06:14 PM

Where exactly do you input the IP address in Aquanotes? I just updated to 3.1 and do not see a place to do this. Still only get the direct connect.

Thanks,

the3dwizard · 07/27/2005, 06:47 PM

Nevermind, figured it out.

Thanks,

07/24/2005, 09:39 AM	#1
simon.007 Registered Member Join Date: Jun 2002 Location: OC, CA, US Posts: 2,135	Can the AquaNotes connect via TCPIP to the Aqua Controller III? Hi, I am thinking of picking up the Aqua Notes but would like to know if the AquaNotes connect via TCPIP to the Aqua Controller III? Thanks Simon

07/24/2005, 05:54 PM	#2
rafal1676 Registered Member Join Date: Nov 2003 Location: NEW YORK Posts: 58	YES BUT YOU NEED AQUANOTES 3.1 OR 3.0C I DONT REMEMBER BUT WHEN YOU WILL BUY AQUANOTES CALL NEPTUNSYS AND TELL THEM THAT YOU NEED UPDATE FOR IT AND THEY WILL HELP YOU

07/24/2005, 07:15 PM	#3
kattner Registered Member Join Date: Dec 2004 Location: Houston Posts: 210	Are you talking about the ACIIIPro or just an ACIII?

07/25/2005, 05:08 AM	#4
rafal1676 Registered Member Join Date: Nov 2003 Location: NEW YORK Posts: 58	its only acIII pro

07/25/2005, 01:26 PM	#5
kattner Registered Member Join Date: Dec 2004 Location: Houston Posts: 210	ok, I see. If you're using the ACIIIPro, you need Aquanotes 3.1 I believe and from there you just tell aquanotes what IP address the ACIIIPro is configured to and thats it. Now, you can achieve TCP/IP access to the other aquacontrollers (that just have a serial interface) as well. You would need a host computer running Aquanotes connected to the aquacontroller via the serial interface. Then, on another computer (a desktop at work or a laptop if traveling for example), you would also run aquanotes as a client computer. You would configure aquanotes running on the client to log into the ip address of the server computer. You could then get full aquanotes functionality over the internet this way too.

07/27/2005, 06:14 PM	#6
the3dwizard Premium Member Join Date: Jul 2004 Location: DFW Posts: 151	Where exactly do you input the IP address in Aquanotes? I just updated to 3.1 and do not see a place to do this. Still only get the direct connect. Thanks,

07/27/2005, 06:47 PM	#7
the3dwizard Premium Member Join Date: Jul 2004 Location: DFW Posts: 151	Nevermind, figured it out. Thanks,