Apex aquanotes connection trouble

InOvrMyHead · 06/09/2011, 11:58 AM

I'm having trouble with my iPhone aquanotes app connecting when I am anywhere, but home. When I'm at home it connects just fine over wifi, but will not connect on 3G. It will not connect thru wifi anywhere except my house and it has never connected thru my 3G cell service.

Does anybody know what is going on?

Thanks,
Steve

swearint · 06/09/2011, 12:46 PM

You will need to create a second account that uses the external address or dyndns account. Do you have external access set up, i.e. can you access it using a browser?

Todd

InOvrMyHead · 06/09/2011, 03:31 PM

Yes I can access it with my browser. I use firefox on my Mac. I have done all the codes for my equipment ion the browser on my computer not the display.

RussM · 06/09/2011, 03:54 PM

Can you access the Apex from a browser on a computer that is not on your home network, via the Internet?

InOvrMyHead · 06/09/2011, 06:21 PM

I just had a buddy test it for me from his house and it does not work from his browser. It seems to be only working from my network in my house.

How do I fix this?

RussM · 06/09/2011, 06:23 PM

Have you configured port forwarding in your router? If not, you have to do that so that the router will allow the necessary traffic from the Internet to pass through to the Apex.

swearint · 06/09/2011, 09:45 PM

There is an entire section of the New User Guide devoted to setting up network access. It is stickied at the top of this forum.

Todd

InOvrMyHead · 06/09/2011, 09:51 PM

I have the new user guide and still am having trouble!

RussM · 06/10/2011, 04:45 AM

Quote:

Originally Posted by InOvrMyHead

I have the new user guide and still am having trouble!

Post screen shots of the Apex network setup page, and also of your routers main status page & port forwarding page. If you'd prefer, you can email them to me. I'll PM you with my email addy.

scsuboy18 · 06/10/2011, 08:05 AM

I'm willing to bet Port Forwarding has not been set up correctly. Look up the manufactures instructions for port forwarding. Without Port Forwarding, your router will stop all incoming traffic.

InOvrMyHead · 06/10/2011, 03:40 PM

I changed the port forwarding and added the apex to it and still nothing???????

scsuboy18 · 06/10/2011, 04:25 PM

Steps to check:

1: Ensure DynDNS is reporting the correct IP address that your ISP had leased to your modem.

2: Ensure Apex has DHCP OFF! and that you assigned it a STATIC IP Address that isn't being used by any other peripherals in your home.

3. Ensure port forwarding is opening port 25 to x.x.x.x (IP of Apex).

4. Try restarting the Apex.

RussM · 06/10/2011, 04:46 PM

Quote:

port forwarding is opening port 25 to x.x.x.x (IP of Apex).

why? Port 25 is for mail (smtp) servers. Or did you mean port 23 (for telnet)? If so, then the rule should be kept disabled at all times unless Neptune support needs telnet access to assist with a problem.

06/09/2011, 11:58 AM	#1
InOvrMyHead Registered Member Join Date: May 2011 Location: Reno Posts: 23	Apex aquanotes connection trouble I'm having trouble with my iPhone aquanotes app connecting when I am anywhere, but home. When I'm at home it connects just fine over wifi, but will not connect on 3G. It will not connect thru wifi anywhere except my house and it has never connected thru my 3G cell service. Does anybody know what is going on? Thanks, Steve

06/09/2011, 12:46 PM	#2
swearint Registered Member Join Date: Mar 2005 Location: Huntsville, AL Posts: 2,645	You will need to create a second account that uses the external address or dyndns account. Do you have external access set up, i.e. can you access it using a browser? Todd __________________ Amendment IX The enumeration in the Constitution, of certain rights, shall not be construed to deny or disparage others retained by the people. Current Tank Info: 125g Reef

06/09/2011, 09:45 PM	#7
swearint Registered Member Join Date: Mar 2005 Location: Huntsville, AL Posts: 2,645	There is an entire section of the New User Guide devoted to setting up network access. It is stickied at the top of this forum. Todd __________________ Amendment IX The enumeration in the Constitution, of certain rights, shall not be construed to deny or disparage others retained by the people. Current Tank Info: 125g Reef

06/10/2011, 08:05 AM	#10
scsuboy18 Registered Member Join Date: Jun 2003 Location: Atlanta, GA Posts: 241	I'm willing to bet Port Forwarding has not been set up correctly. Look up the manufactures instructions for port forwarding. Without Port Forwarding, your router will stop all incoming traffic. __________________ "If there was hope, it must lie in the proles, because only there, in those swarming disregarded masses…could the force to destroy the Party ever be generated." - George Orwell, 1984 Current Tank Info: N/A - about you get back into hobby

06/10/2011, 04:25 PM	#12
scsuboy18 Registered Member Join Date: Jun 2003 Location: Atlanta, GA Posts: 241	Steps to check: 1: Ensure DynDNS is reporting the correct IP address that your ISP had leased to your modem. 2: Ensure Apex has DHCP OFF! and that you assigned it a STATIC IP Address that isn't being used by any other peripherals in your home. 3. Ensure port forwarding is opening port 25 to x.x.x.x (IP of Apex). 4. Try restarting the Apex. __________________ "If there was hope, it must lie in the proles, because only there, in those swarming disregarded masses…could the force to destroy the Party ever be generated." - George Orwell, 1984 Current Tank Info: N/A - about you get back into hobby

06/09/2011, 03:31 PM	#3
InOvrMyHead Registered Member Join Date: May 2011 Location: Reno Posts: 23	Yes I can access it with my browser. I use firefox on my Mac. I have done all the codes for my equipment ion the browser on my computer not the display.

06/09/2011, 03:54 PM	#4
RussM Registered Member Join Date: Jan 2007 Location: El Cajon, CA Posts: 7,818	Can you access the Apex from a browser on a computer that is not on your home network, via the Internet?

06/09/2011, 06:21 PM	#5
InOvrMyHead Registered Member Join Date: May 2011 Location: Reno Posts: 23	I just had a buddy test it for me from his house and it does not work from his browser. It seems to be only working from my network in my house. How do I fix this?

06/09/2011, 06:23 PM	#6
RussM Registered Member Join Date: Jan 2007 Location: El Cajon, CA Posts: 7,818	Have you configured port forwarding in your router? If not, you have to do that so that the router will allow the necessary traffic from the Internet to pass through to the Apex.

06/09/2011, 09:51 PM	#8
InOvrMyHead Registered Member Join Date: May 2011 Location: Reno Posts: 23	I have the new user guide and still am having trouble!

06/10/2011, 03:40 PM	#11
InOvrMyHead Registered Member Join Date: May 2011 Location: Reno Posts: 23	I changed the port forwarding and added the apex to it and still nothing???????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trouble with new Apex - can't connect to home network	Brent Thomann	Neptune Systems	22	04/12/2011 05:11 AM
Please help me break through Cyberspace - Apex Internet Connection Help Needed	tvshow	Neptune Systems	8	03/25/2011 08:15 PM
apex trouble help	eggerstout	Neptune Systems	7	03/07/2010 09:13 PM
AC Pro Aquanotes connection	Esquare	Neptune Systems	3	11/15/2008 04:18 PM
Can the AquaNotes connect via TCPIP to the Aqua Controller III?	simon.007	Neptune Systems	6	07/27/2005 06:47 PM